Month: July 2020

Even if you have invested in the best quality tub grinder, a time will come when you will need to replace worn output. However, replacing the parts is not a problem. The biggest challenge with most of the machine users is knowing the right time to make the replacement.

Knowing when you should replace the tub grinder hammer is the most important thing. You need to know when is the right time to avoid making replacement when there is still some lifespan left or wait until a lot of damages has been made. Here are the signs you need to replace your tub grinder hammer:

Poor performance

One of the signs that you need to consider replacing the tub grinder hammer is the reducing performance of the machine. You will notice that the grinder is drastically slowing in performance, and there is no approach that’s improving it, then you need to consider making a replacement. Reducing performance is an indication that a tub grinder hammer cannot cut efficiently anymore. Therefore, a replacement would be the best decision.

Reducing Productivity

Another indication that shows that you need to consider replacing your tub grinder hammer is a reduction in productivity. If your tub grinder machine cannot produce as it used to be, then the problem must be the cutting tools. Therefore, you need to find a way that you can increase the cutting effectiveness of the machine, and if that one cannot work, a replacement would be the only solution. Make sure that you have replaced the hammer with the right quality.

Uneven ground

Another sign that perhaps now is the time to replace the tub grinder hammer is uneven ground. If you are in the business of grinding wood, then you need to give the best quality by producing standard ground.  One of the best ways to achieve that is by producing even ground. If the tub grinder cannot offer that, it’s time to make a replacement.

Frequent repairs

If your tub grinder hammer has been requested frequent repairs, that’s an indication it cannot withstand the condition is supposed to. In such cases, you have no other choice rather than going for a replacement.

Reducing efficiency

If you notice that the tub grinder is consuming more fuel and time for the same piece of work, it means that it has become inefficient. In such cases, the problem is the cutter tools. That’s why one of the solutions is replacing the tub grinder hammer.

Are you planning to buy a cold planer milling machine for the first time? Well, if you are a new road contractor and planning to set powerful machinery, this is one of the crucial equipment that you need to add. However, buying these machines can be a little bit tricky, especially for first-time buyers.

But we are making it easy for newbies to select new cold planer milling machine for sale. In this guide, we have put together four things that you need to put into consideration:

Buy Brand Name

As a newbie, the first thing that you need to work is the brands in the market. There are all kinds of brands in the market, but not all of them can provide you with the best quality cold planer milling machine for sale. So, you need to know the various brands in the market and more so the best one. Check the lists of top-ranking brands but go for the one that has been around for a longer time. Reputation is also a crucial factor to consider about the brand.

Machine Quality

Quality is another crucial element that you need to check in a cold planer milling machine for sale. There are several things that you need to know about machine quality. One of them is the quality of the body. Due to the abrasive nature of the cold planing, you need a rugged body. Second is the quality of wear parts. Check the quality of the milling drum, milling teeth, and other crucial parts. Lastly is the quality of technologies used for the construction of the machine.

The Size

The other factor that you need to consider when selecting a cold planer milling machine for sale is the size. There are all sizes of cold planers in the market, but you need to pick one that works for your needs. To get the right size, you need to know the kind of cold planing that you are planning to do. Do not make the mistake of buying a machine that’s too large or too small for you. Just make sure that it is the right machine for the job.

Motor Horsepower

The other thing that you need to consider the power of the machine. Depending on the cold planing you will be doing, get an engine that provides enough power. That’s why you need to check the machine’s horsepower. Note that the performance of the cold planer depends on the power of the engine.

If you have put money in the wood processing industry, the best thing you can do is to maintain your plant in good condition. That means keeping your wood chipping machine in the best condition possible. There are several things that you need to do. One of these things is keeping the machine parts in the best condition possible.

Buying replacement parts is the most important thing. You must ensure that you are getting the right replacement parts to maintain your machine productivity. Here are some of the best tips for selecting reliable wood chipper parts for sale:

Buy the right size

The first thing that you need to do is to select the right size of the wood chipper parts for sale. This is important because there are all kinds of sizes in the market, depending on the kind of wood chipper you are using. What you need is to know the size of the parts that came with the machine for the first time. This is information that you can get from the machine manual that is provided by the manufacture. So, that should be easy. If you don’t have the manual, then you can look up the model you are using on the manufacturer website.

Get The Right Quality

When selecting from the available wood chipper parts for sale, it is important that you check quality. The quality of the wood chipper parts that you buy has a significant effect on your machine. First, quality determines your machine’s performance and productivity. Second, the overall efficiency of the machine is greatly determined by the quality of the parts you have installed. Buying wear parts made from high-quality materials is highly recommended. Tungsten carbide tipped wood chipper parts are the most recommended.

Part’s Versatility

The other thing that you need to consider is the versatility of the wood chipper parts for sale. There are many factors that you need to look at when deciding the versatility of wood chipper parts. Versatility is all about having tools that can work on a vast range of wood. So, you need to check the quality of the material used.

For the most versatile parts, you need to check the grade of carbide used for the tip. Tungsten carbide the most recommended metal. It offers high hardness and strength features, which makes it easy to deal with a vast range of woods. The body should be the highest grade steel.